Convert-A-Ball Ball Mount with 2 Inch Drop Review – 2011 Honda Odyssey – etrailer.com

Convert-A-Ball Ball Mount with 2 Inch Drop Review – 2011 Honda Odyssey – etrailer.com


Today on our 2011 Honda Odyssey well be test
fitting the Convertible Cushion ball mount, part number AMSC2. Before we fit our ball mount we want to take
one important measurement on the vehicle. We want to measure the hitch height and thats
the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from
vehicle to vehicle depending on tire size, exact model, or other aftermarket parts. On our particular Odyssey, with this particular
hitch, we have a hitch height measurement of 12 inches. Now well go ahead and mount our ball mount
in the drop position. Well fit the shank of the mount into the receiver
tube of our hitch, line up the pin holes and secure with a standard 5/8th pin and clip. Now this mount offers a two inch drop so when
we measure from the ground to the top of the ball platform well get a height of 10 inches. If your trailer measures 10 inches from the
bottom of the coupler to the ground when sitting level this would be the right ball mount to
use. Now well go ahead and flip it over and repeat
the process for the rise position. This ball mount offers a 3 inch rise.

About the Author: Michael Flood

Leave a Reply

Your email address will not be published. Required fields are marked *