Draw-Tite Ball Mount Review – 2013 Toyota Sienna – etrailer.com


Today on our 2013 Toyota Sienna we’ll
be test fitting the Draw-Tite ball mount with a 3/4 inch rise or a 2 inch drop rated at
7,500 pounds, part number 2923. Before we begin our test fit, we will first
need to obtain the hitch height of our vehicle. This is the measurement from the ground to
the inside top of the receiver tube. The hitch height for this vehicle is about
11 1/2 inches. Keep in mind your hitch height might vary
due to tire size, hitch style or aftermarket accessories. We’ll now begin our test fit in the drop
position by sliding the shank of the ball mount into the opening of the hitch. We’ll then secure it with
the pin and clip.

About the Author: Michael Flood

Leave a Reply

Your email address will not be published. Required fields are marked *