How to Install Car Stereos & Speakers : Removing Old Front Speakers for Car Stereo Installation

How to Install Car Stereos & Speakers : Removing Old Front Speakers for Car Stereo Installation


Hi! This is John on behalf of expertvillage.com.
In this video clip, I will be taking you through step 3 in our procedure for replacing a front
speaker. In this step, we need to go ahead and pull the speaker out and disconnect the
wiring. Sometimes when you pull the speaker out, it can be a little bit challenging because
you are running into your dash as well, and you just kind of need to move it around until
you get it positioned right where you can take it out. If we flip it over, we see that
there are two wires going to our speaker. Sometimes your wires will have these little
clips on the end of them which make them real handy and sometimes your wires will be soldered
directly to your speaker. If it is soldered, what you will want to do is go ahead and just
clip those wires off with wire cutters and when we put our new one on, we will just put
new ends on, so go ahead and just take both of those off.

About the Author: Michael Flood

2 Comments

  1. @repub4life it's more to this than that. this clip is too short. it should show step by step from the beginning. however i did learn something from this. i have more confidence on working on my car. i save a lot. mechanics , electricians, etc charge a lot as we know.

Leave a Reply

Your email address will not be published. Required fields are marked *