How to Replace the Speakers | HP Stream x360 11-p000 Convertible PC | HP

How to Replace the Speakers | HP Stream x360 11-p000 Convertible PC | HP


Note: The following video depicts a specific configuration of the notebook. The same removal and replacement procedures apply to all configurations of the notebook. Before you begin: Remove the base enclosure. Removal – 1. Disconnect the battery cable from its connector on the system board. IMPORTANT: Make careful note of the routing of the speaker cable for later replacement. 2. Disconnect the speaker cable from its connector on the system board. 3. Remove the speaker cable from the routing tabs on the battery. 1. Remove the four 5.5 mm P1 Phillips-head screws that secure the speakers to the top cover. 2. Lift the speakers off of the alignment pins on the top cover and remove. Replacement – 1. Place the speakers onto the alignment pins on the top cover. 2. Replace the four 5.5 mm P1 Phillips-head screws that secure the speakers to the top cover. 3. Route the speaker cable through the routing tabs on the battery. 4. Connect the speaker cable into its connector on the system board. 5. Connect the battery cable into its connector on the system board.

About the Author: Michael Flood

Leave a Reply

Your email address will not be published. Required fields are marked *