Jeep Wrangler JK RedRock4x4 1.5 in Wheel Spacers – Black Review & Install

Hey guys Sarah from And today we review an install of Red Rock four-by-fours 1.5 inch wheel spacers in black with a 5 by 5 bolt pattern These will figure oh 7 through 18 Jeep Wrangler JK’s these spacers feature a durable aluminum construction For lightweight strength and come in an anodized black finish this kit includes pre-installed studs and lug nuts as well as red loctite these spacers are 1.5 inches thick for more wheel and fender clearance as well as an aggressive stance These spacers feature a hub centric design with a 5 by 5 bolt pattern coming in at around $60 This is certainly a budget-friendly way to improve clearance as well as the look of your chief I’m giving this install a one out of three wrenches on the difficulty meter it can be done in approximately one hour and is as simple as taking your wheels off and putting them back on your Jeep for This install we used a 1/2 inch drive ratchet 19 millimeter socket a 13/16 socket for the lug nuts an impact gun and a torque wrench Alright, so the first step in our uninstall is to remove our wheel Before you put your spacer on now would be the time to put some Loctite on each of the studs because we’re doing this just For demonstration, I’m gonna skip that step But it’s nice to call out and it’s nice to have instead of having to go get it now I can put our spacer over the factory studs and Using the included lug nuts and Sell them on each stud If you can’t get them by hand, you can do that with a 19 millimeter socket Once we have them all on you can tighten them down At this point you might want to grab a friend to help you we’re gonna hold the brake so the hub does not move so We can torque down our lugs All right with our spacer on and torque down we can now get our wheels back on our Jeep Alright so that is going to do it for the review and install of our spacers remember for all things Jeep keep it at You

About the Author: Michael Flood

Leave a Reply

Your email address will not be published. Required fields are marked *