Toyota How-To: Cruise Control | Toyota

Toyota How-To: Cruise Control | Toyota


(upbeat music) – [Narrator] Cruise control on your Toyota is controlled by this dock and includes indicators in
the multi-information display or MID that tell you
when the system is on, and what speed is set. You can use cruise control to
help you drive at a set speed above 25 miles per hour without pressing on the accelerator pedal. To activate the system,
press the on/off button on the end of the stock. The cruise control icon will appear in the instrument display. Then, accelerate or decelerate
to your intended speed, and press the stock down to set the speed. When you do the set indicator
and speed will appear. If you need to increase your
set speed, push the stock up and release it for a
one-mile-per-hour increment. Holding the stock up will
accelerate continuously to a desired speed. Release the stock and the speed will set. To reduce the set speed,
push down and release it for a one-mile-per-hour
increment decrease. Holding the stock down will
decelerate continuously. Release the stock at your desired speed and the speed will set. If you wish to cancel cruise
control you can either, pull the stock towards
you, or tap the breaks. To resume to your previously set speed, push the stock up when driving
above 25 miles per hour. To turn the system off,
press the on/off button.

About the Author: Michael Flood

33 Comments

  1. Hi I have a 2007 toyota Cruella seven seater Diesel wot can stop your heater to not work as the air conditioned works fine but when I try and press buttons to the temperature it does nuffink and nuffink happens do you no wot that can be please

Leave a Reply

Your email address will not be published. Required fields are marked *